The Melting Pot 2.0/The Melting Pot 2.0.iso/food/eggsdair/fresh_mo.zza

Text File | 1995-09-27 | 6.0 KB | 130 lines

Newsgroups: rec.food.recipes
From: [e-mail] (Dana Kain)
Subject: Mozzarella
Message-ID: <[e-mail]>
Organization: One Stop PCBoard - Richland, WA - 509-943-0211
References: <[e-mail]>
Date: 5 Feb 94 09:47:00 GMT

I have tried making fresh mozzarella using this recipe, which is very
long, a couple of times and have not had any success. The main problem
I have is controlling the temperature of the milk mixture as we have
an old stove.

This recipe is from a magazine called 'Sunset', June 1989 edition, pages
92-93. If is from a chef at Tra Vigne in St. Helena, California who
perfected this technique through repetition.


Fresh mozzarella (makes 2 1/2 to 3 pounds)
-----------------------------------------------------------------------
Rennet, tablets or liquid, is found in pharmacies and health-food
stores.

3 cups whipping cream
1 3/4 gallons plus 1 cup nonfat milk (29 cups total)
1/4 rennet tablet or 1 teaspoon liquid rennet
1/4 cup cool water (about 70 degrees F.)
1/2 cup freshly opened buttermilk
Brine (directions follow)

Before you begin, sterilize all tools and containers by pouring boiling
water over them or immersing them in boiling water. During the
cheesemaking process, have boiling water on hand to pour over tools --
spoons and thermometer in particular -- each time you return them to the
milk mixture. This prevents certain bacteria from affecting the cheese's
flavor.

To make the curd, pour cream and nonfat milk into a 3-4 gallon pan; stir
with a metal spoon to mix. Place pan on lowest heat until milk is 90
degrees, stirring occasionally and checking temperature often; if
liquid is cold, this may take up to 1 hour. But be patient, since higher
cooking temperatures are harder to control.

As the milk heats, combine the rennet and cool water in a small bowl.
Let the mixture stand until completely dissolved, about 15 minutes, you
may need to crush the tablet with the back of a spoon. (Or mix liquid
rennet with water in a bowl.)

When the milk reaches 90 deg., add buttermilk and stir thoroughly
with a spoon. Ladle out any butter lumps.

Slowly pour rennet mixture in a spiraling pattern over milk, stirring.
Continue to stir for 3 to 5 minutes, using an up-down circular motion to
distribute the rennet evenly.

Keep the milk at 90 degrees until it forms a clot firm enough to hold
its shape in a spoon, 30 to 45 minutes; check temperature about every 5
minutes, removing mixture from heat intermittently, if needed. As you
check the temperature, insert the thermometer gently to avoid breaking
clot more than necessary.

Next, to create crosshatch pattern and to release clear-colored whey,
cut through solid clot to pan bottom with a long knife.

First cut clot across, then at right angles for 1/2-inch squares. Then
cut diagonally, holding knife at a 45 degree angle; turn pan at right
angle and repeat. Let curds stand on low heat at 90 degrees for 15
minutes longer (remove pan occasionally, if necessary, to keep
temperature from fluctuating), then stir with a slotted spoon for 30
seconds.

>From this point on, you need clean but not sterilized equipment.
Quickly line a large colander with at least 2 layers of cheese-cloth,
edges overlapping rim; set in a sink with an open drain. Ladle curds
into colander. Let stand until curds stop dripping, about 1 hour.

To protect cheese's flavor, place colander in a large pan; cover
airtight with plastic wrap. Chill until curd is ready to shape (see
below), 1 to 4 days. Each day, replace cheesecloth and discard whey.

Testing the curd. To determine when curd is ready to shape, cut off a
small 1/4-inch slice and cover with hot water (170 degrees to 180
degrees). If after 15 to 30 seconds the slice begins to soften and melt
and, when held by 1 end, the piece stretches from its own weight, it's
ready. If the slice doesn't stretch but tears, chill remaining curd,
testing daily, up to 4 days. If curd still won't melt -- milk got too
hot or sufficient acidity did not develop -- slice and cover with hot
water (170 to 180 degrees), stirring. Drain, rinse with cold water,
drain again. Season with salt; eat like cottage cheese.

Shaping the curd. Divide the ready curd in 4 equal portions; let the
number of portions you want to use come to room temperature. Cover and
chill remaining curd in cloth-lined colander until you want to shape it
-- no more than 5 days from when you started.

Working with 1 curd portion at a time, trim off and discard any dried-
looking bits. Cut curd into 1/4-inch-thick slices and put into a large
bowl. Pour about 1 quart hot water (170 to 180 degrees) over slices to
cover; let stand 1/2 to 1 minute to warm and begin to melt. With the
back of a large spoon, gently push slices together and lift them from
beneath, also on spoon back, so the weight of the cheese makes it
stretch. Repeat lifting cheese along the length to stretch it; don't let
rope fold back onto itself.

When cheese is flowing softly, lift 1 end of the rope from the water and
roll it under itself to form a smooth-surfaced ball 1 to 2 inches
thick; pinch from rope and drop into brine. Working quickly, repeat to
shape rest of cheese; if handled too slowly or roughly, cheese looks
uneven -- but it's fine to eat. Keep cheese in brine 5 to 15 minutes to
flavor (saltiness depends on length of time in brine); lift from brine.
For tenderest texture and most delicate flavor, rinse and serve at once;
or keep cold, covered, no more than 4 hours. Flat to bitter flavors
develop when cheese is past its prime, although it is safe to eat.

Repeat to shape remaining cheese. Makes 2 1/2 to 3 pounds, depending on
how long the curd drains before shaping.

Per ounce, estimated only; 60 cal.; 4 g protein; 4.5 g fat; 1 g carbo.;
sodium varies with time in brine; 15 mg chol.

Brine. In a corrosion-resistant bowl, make enough brine to cover cheese,
using 1/2 cup salt for each 1 quart water.

Good luck.